[Darkchild]

Welcome to another one of my guides!!
Done with the help of THIS website!

First, you need:

• A computer (obviously) with Windows (Won't work with vista!)™
• A PSP (duuh)
• A Wireless Access Point (that is connected to your PC)

Also! You need to download these:

• PPjoy- PPJoy - Parallel Port Joystick driver for Windows 98, Me, 2000 and XP
• wifi controller- http://imk.cx/psp/wificontroller/WiF...ler_v0.4.4.zip

The PPjoy's download method may seem suspicious but it's clean trust me

Installation:

I'm going to attempt to explain how to get this working. These steps are all necessary and you should pay close attention to them.

1. Extract the Wifi controler file and open the PSP directory and edit the proper wifi.cfg for your PSP version and set the IP of the computer you are going to use this on. If you don't know your IP address. Go to your "Start" menu. Click on "Run..." When the box opens up type "cmd.exe" without the quotes. When the command prompt opens type "ipconfig" without the quotes. It will report your IP address.

2. Copy the correct director(y|ies) to your PSP depending on whether you have a v1.00, v1.50 or v3.xx PSP. If you use a custom firmware mod that allows the use of a single EBOOT.PBP files on a v1.50 PSP then you can use the v1.00 directory.

Note : Depending on your access point's wireless encoding security, you might have to use the 3.40 version! because 1.50 does not work with WPA-TKIP!

3. Download and install PPJoy.


4. After it is installed open up your "Control Panel" and click on "Parallel Port Joysticks".

5. When the window comes up click "Add..." at the bottom. On the next screen change "Parallel port" to "Virtual joysticks" and then click "Add."

6. It will want to install some drivers so either have it scan automatically or point it to the directory you installed PPJoy to.

7. After it is done installing, click the "PPJoy Virtual joystick 1" in the menu and click "Mapping..."

8. Choose "Set a custom mapping for this controller" and click "Next."

9. Set these options for best results:

• Axes = 2 (X Axis and Y Axis)
• Buttons = 9
• POV hats = 1

press next...

• X Axis = Analog 0
• Y Axis = Analog 1

press next again...

• Button 1 = nothing
• Button 2 = Digital 0
• Button 3 = Digital 1
• Button 4 = Digital 2
• Button 5 = Digital 3
• Button 6 = Digital 4
• Button 7 = Digital 5
• Button 8 = Digital 11
• Button 9 = Digital 10

next again...

• North = Digital 6
• East = Digital 7
• West = Digital 9
• South = Digital 8

13. Repeat the steps above to add up to a total of 4 joysticks. (only if you want more than one PSP to play with)

14. Inside the PC directory, you will find a WiFiServer.exe. If you are just using one PSP to play games, you can run this file directly. If, however, you are or will be using more than one PSP, you will need to run one of the batch files in the directory. Simply double-click the batch file for the appropriate controller. You must have a server running for each controller you wish to use. The server(s) must also be running at all times while using the PSP as a joystick. When you are done using it, you can safely exit the program by pressing CTRL+C or clicking the close button for the window.
And that's it!
Have fun using your PSP to play PC games

[FrozenIpaq]

Great guide I recommend all PSP users to try this out at some time, it's a great way to fool around

[Darkchild]

yeah, and a great way to play too! =D

Instead of buying a lookalike gamepad for the pc you can play with the real deal!

[Acerthief]

Looks neat, but no wifi for me

[Billyjj]

I cant get this to work i put in 192.168.2.2 as it says in ipconfig and I forwarded 20001 port on my router that it says at the bottom and still doesnt work...

[Darkchild]

no need to forward ports, remove that rule!
and try again, just be sure to have your firewall off and make sure the server is on, and that the IP is correct

[Billyjj]

Still doesnt work

Do I have to add my computer whats connected the router or my laptop on wireless
ipconfig added IP Address .......192.168.2.2
to

# set the address of the server...
# note: make sure there are no spaces before or after the = sign
address=192.168.168.2.2

[Darkchild]

that wiki.conf must have the IP of the computer that is running the WifiServer app
as long as the computer or laptop is connected to the wireless router, it will connect to it, remember, this is a LAN connection not a INTERNET connection

[Billyjj]

Still doesnt work.. put in the ip address what it says on my laptop.

[Darkchild]

put here a screenshot of your IP Data (all of it, hide the mac adresses and DNS data..and etc... ). send me your wifi.cfg.

and after that, what version are you using of WifiJoy? because I said it above, if you have a high security encription in your WLan you might need to use the 3.40 version.

P.S: Can the PSP actually connect? (to the network I mean)