• Steam recently changed the default privacy settings for all users. This may impact tracking. Ensure your profile has the correct settings by following the guide on our forums.

CFW 3.51 M33 Guide

canadajames

canadajames

Soon to be hardware mod
Everyone who reads this will probably scream with nerdy glee. I'll give you the links now for how you can upgrade your psp To the newest custom firmware thx to ketchup and his team. Make sure you have at least 75% battery 100% is best Don't at anytime unplug you cable to restart your psp during the process I would read through the whole guide once just to make sure you understand everything first. One more thing this is a link to some details posted by ic3 thx.http://forums.exophase.com/showthread.php?t=2728

http://popotz.tistory.com/381
This is where I got everything it's from a korean website. I'll now post up everything in a step by step process.


1. Download these files by following links
For CFW file- http://dl.qj.net/PSP-custom-firmware:-CFW-v3.51-M33-PSP/pg/12/fid/14098/catid/163
For 3.51 Update- http://www.psp-hacks.com/file/1189
For 1.50 Update-http://www.psp-hacks.com/file/4


2. uncompress it using your favourite software winrar works for me.
(Make sure to name the 3.51 file 351.PBP and the 1.50 file 150.PBP)


3. Now if you are on 1.5 or under go to 1.5 and place the 1.50 only folder in the M33 download under your PSP/GAME/ folder. Then go to XMB and run the program.


4. Once done if you are 1.50 copy the M33CREATOR folder to your PSP/GAME/ folder.


4b. If you are on custom firmware copy it to your PSP/GAME/GAME150/ folder.


5. Now get those two eboot files and place them in the M33CREATOR folder.


6. Once you are done that disconnect usb and go to your game memory stick folder in the XMB. Run the M33 CREATOR. Once it is done it will go back to the XMB.


7. Go again to the same spot and now run the 3.51 M33UPDATE. Read through it and see if you are comfortable with what your about to do. Then press X to begin or R to exit.


8. After the process is complete it will give you a message and you will be prompted to restart by pressing X. Go ahead and do it. Then turn your psp back on. If everything went well you should be running 3.51 M33.:w00t:

Well hope this guide helped. Here is the actual readme included in the update folder.
I thought my guide was a bit more helpful rep would be nice and if anything is said wrong feel free to tell me. Also You must acknowledge that if anything goes wrong it is not my or anyone elses responsibility but your own. There is a risk.

--------------------------------------------------------------------------------------------------------

PSP 3.51 M33 Installation

1 - If you are under official 1.50 PSP firmware, copy kxploitpatcher and kxploitpatcher% folders from "1.50only/" of this download to your "ms0:/PSP/GAME/" and use it.
2 - Once done it, or if you are under any Special/Open Edition, copy M33CREATOR folder to your "ms0:/PSP/GAME" (1.50fw) or "ms0:/PSP/GAME150" (SE/OE)
3 - Download official 3.51 eboot, rename it to 351.PBP and place it on "ms0:/PSP/GAME/M33CREATOR/" or "ms0:/PSP/GAME150/M33CREATOR/"
4 - Download official 1.50 eboot, rename it to 150.PBP and place it on "ms0:/PSP/GAME/M33CREATOR/" or "ms0:/PSP/GAME150/M33CREATOR/"
5 - Go to Games/Memory Stick on your PSP, and execute "3.51 M33 CREATOR". Once finished, it will go back to the XMB.
6 - Go again to Games/Memory Stick on your PSP, and execute "3.51 M33UPDATE". You'll have to press X to agree to the installation.
7 - When finished, press X to shut down and reboot manually.
8 - Enjoy your 3.51 M33 ;)

-M33 Team
 
I've upgraded, and all my customizations still work, but for some reason the coldboot sound is loaded from elsewhere, so that customization won't work for now, until someone figures out which file it's in.

Everything else works fine so far, with no problems, except CWCheat is broken for now.
 
Actually I didn't. I followed the readme. And I actually accidentally posted that in your guide instead of the thread in General. Identical topic names, but totally different sections XD

It's a pretty good guide, though. But since I've been updating my PSP's CFW since 3.03 OE-B, it's become a pretty fast and easy process for me. Main difference with M33 as opposed to OE, was that the Creator made the installer for you, you didn't have to copy two programs to your memory stick or move any files around after running the creator. It did it all for you.


EDIT:
Looks like x3sphere made his own official eXophase CFW 3.51 M33 Install Guide. But props for having yours up first :D
 
Thanks, nice guide :) Yeah I put my own up just to simplify things a bit... but I'll leave this one here in PSP General, incase someone forgets to check the FAQ forum.
 
canadajames said:
Everyone who reads this will probably scream with nerdy glee. I'll give you the links now for how you can upgrade your psp To the newest custom firmware thx to ketchup and his team. Make sure you have at least 75% battery 100% is best Don't at anytime unplug you cable to restart your psp during the process I would read through the whole guide once just to make sure you understand everything first. One more thing this is a link to some details posted by ic3 thx.http://forums.exophase.com/showthread.php?t=2728

http://popotz.tistory.com/381
This is where I got everything it's from a korean website. I'll now post up everything in a step by step process.


1. Download these files by following links
For CFW file- http://dl.qj.net/PSP-custom-firmware:-CFW-v3.51-M33-PSP/pg/12/fid/14098/catid/163
For 3.51 Update- http://www.psp-hacks.com/file/1189
For 1.50 Update-http://www.psp-hacks.com/file/4


2. uncompress it using your favourite software winrar works for me.
(Make sure to name the 3.51 file 351.PBP and the 1.50 file 150.PBP)


3. Now if you are on 1.5 or under go to 1.5 and place the 1.50 only folder in the M33 download under your PSP/GAME/ folder. Then go to XMB and run the program.


4. Once done if you are 1.50 copy the M33CREATOR folder to your PSP/GAME/ folder.


4b. If you are on custom firmware copy it to your PSP/GAME/GAME150/ folder.


5. Now get those two eboot files and place them in the M33CREATOR folder.


6. Once you are done that disconnect usb and go to your game memory stick folder in the XMB. Run the M33 CREATOR. Once it is done it will go back to the XMB.


7. Go again to the same spot and now run the 3.51 M33UPDATE. Read through it and see if you are comfortable with what your about to do. Then press X to begin or R to exit.


8. After the process is complete it will give you a message and you will be prompted to restart by pressing X. Go ahead and do it. Then turn your psp back on. If everything went well you should be running 3.51 M33.:w00t:

Well hope this guide helped. Here is the actual readme included in the update folder.
I thought my guide was a bit more helpful rep would be nice and if anything is said wrong feel free to tell me. Also You must acknowledge that if anything goes wrong it is not my or anyone elses responsibility but your own. There is a risk.

--------------------------------------------------------------------------------------------------------

PSP 3.51 M33 Installation

1 - If you are under official 1.50 PSP firmware, copy kxploitpatcher and kxploitpatcher% folders from "1.50only/" of this download to your "ms0:/PSP/GAME/" and use it.
2 - Once done it, or if you are under any Special/Open Edition, copy M33CREATOR folder to your "ms0:/PSP/GAME" (1.50fw) or "ms0:/PSP/GAME150" (SE/OE)
3 - Download official 3.51 eboot, rename it to 351.PBP and place it on "ms0:/PSP/GAME/M33CREATOR/" or "ms0:/PSP/GAME150/M33CREATOR/"
4 - Download official 1.50 eboot, rename it to 150.PBP and place it on "ms0:/PSP/GAME/M33CREATOR/" or "ms0:/PSP/GAME150/M33CREATOR/"
5 - Go to Games/Memory Stick on your PSP, and execute "3.51 M33 CREATOR". Once finished, it will go back to the XMB.
6 - Go again to Games/Memory Stick on your PSP, and execute "3.51 M33UPDATE". You'll have to press X to agree to the installation.
7 - When finished, press X to shut down and reboot manually.
8 - Enjoy your 3.51 M33 ;)

-M33 Team
Click to expand...

Nice! i should sticky this. :laugh:
 
Ecstacy said:
i tried running the M33 Creator it started but then it said The game could not be started. (80000001)
Click to expand...


If you're on any official firmware other than 1.5, then it won't work.
What firmware do you have.
 
I got all the steps through and i have m33 on my psp, when i run it it says "The game could not be started. (8002014C)

some1 plz hlp with this
 
zakua001 said:
I got all the steps through and i have m33 on my psp, when i run it it says "The game could not be started. (8002014C)

some1 plz hlp with this
Click to expand...


which particular version of firmware are you on?
and this is pretty out of date.
 
You must log in or register to reply here.
Back
Top