custom firmware problems

[N_II_C_IK]

i just used a flasher to 3,52 m33!!! custom firmware and now i cant play any isos or anything. How do i fix this problem????

 

[x3sphere]

i just used a flasher to 3,52 m33!!! custom firmware and now i cant play any isos or anything. How do i fix this problem????

what exactly happens when you try to run an ISO?

 

[N_II_C_IK]

i had 3.51mm with 3iso's. then after i ran the flsher and got 3.52 m33 all my isos issappeared. its all f"d up. Couldi downgrade to 1.50 all over again?

 

[x3sphere]

i had 3.51mm with 3iso's. then after i ran the flsher and got 3.52 m33 all my isos issappeared. its all f"d up. Couldi downgrade to 1.50 all over again?

Yes, you can by following this guide:

http://forums.exophase.com/showthread.php?t=1508

Flashing 3.52 M33 would not make your ISO disappear though.

 

[N_II_C_IK]

this will work with 3.52 mm3 firmware???

 

[Acerthief]

you can try to format your flash1
(go to recovery menu [Advanced] -> [Format flash1])

works everytime for me

 

[Hanzo_f19]

make sure that the ISOs name has less than 32 characters
Try to change the name to something small (eg:test1).

 

[frosty5689]

Easiest way is try formatting your memorystick and putting the files into it again.

 

[Acerthief]

Easiest way is try formatting your memorystick and putting the files into it again.

Don't always agree. but IS a way though, I'd recommend formatting it on your PSP.

If the memory's fake then formatting it over and over again would help.