hi guys... have this psp with a firmware 3.71 M33-3 from my friend and i want to update it. can you help me how to update to 4.01 M33-2 is there any update in between? pls help me im new in this update stuff.. in if im going to update from 4.01 M33-2 what firmware would you suggest? and how? thanks a lot...
-
Steam recently changed the default privacy settings for all users. This may impact tracking. Ensure your profile has the correct settings by following the guide on our forums.
3.71m33 to 4.01M33??
- Thread starter melchiore
- Start date
january39
eXo Staff
Just use the 5.00M33 Updater and go straight to 5.00M33, then update to 5.00M33-6.
Very easy. Btw 4.01M33 is the firmware as is 5.00M33. M33 is the FW build (and probably the best :biggrin
Alex
Active Member
i agree with january39 but it really depends what you want.
Be aware that when you update from 3.71 the load time from the ms will slow down dramtically.
This is corrected in 5.00m33-6 i think, you have to enable the function in the 5.00 recovery menu
also i believe that 3.71 is the best for playing games that require the popsloader.
Be aware that when you update from 3.71 the load time from the ms will slow down dramtically.
This is corrected in 5.00m33-6 i think, you have to enable the function in the 5.00 recovery menu
also i believe that 3.71 is the best for playing games that require the popsloader.
mortalinstincts
eXophase Staff
and if you have a phat go throuigh M33-1 if you want to install the 150k add on
J
jx233
Guest
mortalinstincts said:
M33-1 suffers from a kernel init bug, so the user should update to 5.00 M33-2, and then install the 1.50 kernel addon if they have a PSP Phat. After that, the user can update to 5.00 M33-6.
J
jx233
Guest
alex_e said:actually i have a phat it the 150k add on doesnt install on m33-6 it crashes when flashing the custom modules, i had to stick to m33-4 as i use 150k homebrew.
This is a serious bug, it should be reported to Dark_Alex (if possible).
mortalinstincts
eXophase Staff
I'll try doing that...
mortalinstincts
eXophase Staff
your previous games? as in from earlier firmwares.
Well, for homebrew, yes and no. Depends on the application your trying to run.
For sony signed games, yes.
Well, for homebrew, yes and no. Depends on the application your trying to run.
For sony signed games, yes.
Alex
Active Member
It might just be my psp....
J
jx233
Guest
alex_e said:
What motherboard does it have?
J
jx233
Guest
alex_e said:
Get its tachyon + baryon +pommel values and compare them to those listed for the TA-082 or TA-086 motherboards.
DC8 is pretty acurate. To make sure you have a TA-086, do you need to press the brightness button to make the screen work when running Version 1.50 or the original Pandora downgrader?
EDIT: Do the tachyon + baryon = pommel values match this?
Alex
Active Member
yes i do need to press the brightness button for the display to work after downgrading but in dc8 i get these
TA-082 Tachyon: 0x00400000, Baryon: 0x00114000, Pommel: 0x00000112
J
jx233
Guest
alex_e said:
You might have a TA-084 (just kidding).
Also, try jas0nuk's PSPIdent. It is even better than DC8 when it comes to hardware information.
Alex
Active Member
lolol
well at the moment its not bothering me since i made my pandora battey, all i know is that i have a 86 or 82, either way the pb will SAVE MY PSP!!!!!
lol
J
jx233
Guest
alex_e said:lolol
well at the moment its not bothering me since i made my pandora battey, all i know is that i have a 86 or 82, either way the pb will SAVE MY PSP!!!!!
lol
I think you have a TA-086, because on my PSP with a TA-082 motherboard I never need to press brightness to make screen work.
So its like this:
TA-082: never a need to press brightness button for Version 1.50.
TA-086: brightness button required to make the screen work for Version 1.50.