dennis96411
Member
Hey x3sphere you know you don't have to install 4.01 M33 to install 4.01 M33-2. I directly installed 4.01 M33-2 from my CFW 3.93 without a problem.
You'll need to first install 3.52 M33, then upgrade to 3.52 M33-3. Once that's done you can install 4.01 M33.
I thought if want to exit game, just press "HOME" and exit the game ?
I'm on 3.52 M33-4.
I've copied the 401 files as instructed and run the '4.01 M33' item from the memorystick 'game' menu. The app starts, screen goes black, it says 'Unpacking... done.' then 'Please wait...'.
Then it just sits at 'Please wait...'. I've left it for over half an hour, it just sits there.
A reboot beings it back into the 3.52 M33-4 XMB.
Is there anything else I need to do to get to 401 from 3.52 M33-4?
Cheers
Yeah dude i pressed "home" and tried to use start/ select to get out of the game but am stilling having to hard boot.
You'll have to have your PSP re-done with custom firmware...pandora's battery, the whole works. That is why you don't want to ever update with the official firmware...it overwrites the custom.i have downloaded the official firmware version 4.01 from sony. how can i upgrade to custom firmware, i tried your steps but it always says "the game could not be started"
note i successfully upgraded my custom firmware 3.7 to 4.01 official firmware.. i want the custom one please help..
Bro got problem ..... during then 3.52 M33update it show "Loading PSAR to RAM ....." then later it show Loading PSAR to RAM ...... read error or corrupted"
What happen ar ???
It went fine. I have succesfully updated to 4.01 m33 thanks a lot guys
Here is a detailed step by step guide for installing the newly released 4.01 M33. Please note that you must be running 3.52 M33-3, or higher to begin this installation. Do note that if you're already running 3.80 M33 and have a WiFi connection, you can simply update to 3.90 M33 by selecting Network Update from the PSP XMB.
Installing 4.01 M33
First grab the 4.01 M33 files and extract them.
1. Copy the UPDATE folder contained in the archive to X:/PSP/GAME
2. Download the 4.01 EBOOT, and then place it in X:/PSP/GAME/UPDATE
3. Navigate to the Game menu on the PSP and execute the program, it will not run unless there is 78 percent battery free.
4. Press X and the update process will start. Yes it may look similar to a regular Sony update but don't worry!
5. Once finished, the updater will ask you to press X or O to reboot. You MUST do this, otherwise you'll end up with a brick.
6. You've successfully installed 4.01 M33!
Upgrading to 4.01 M33-2
After installing 4.01 M33, it is recommended to apply the latest update for additional bug fixes and related firmware improvements. Below is a quick three step walkthrough on how to manually update the firmware. Please note that you must have already installed 4.01 M33, as detailed above, in order to begin this process.
1. Download the 4.01 M33-2 update files and extract the archive.
2. Copy the UPDATE folder contained in the archive to X:/PSP/GAME, where X is the letter of your memory stick drive. If asked to overwrite any files, do so.
3. Navigate to the Game menu on the PSP and execute the 4.01 M33-2 update program. Then follow the on-screen instructions to update your firmware.
Need Help!
This is what happens when I install:
I install update folder with eboot inside game folder along with 401.PBP.
Then I run it in the game-mem stick. verifying 401.PBP-ok, verifying u235-ok.
"press x to start" it said. Then i presses x.
"Starting sce updater" then the screen went blank.
then this message came out:
"The system configuration of this PSP
system does not appear to be correct.
The update cannot be completed.
Contact the technical support for assistance,
(DRNFFFFFFBO)"
what should i do?
Respknightz
Can post me the web containing the magic card and pandora....
Need Help!
This is what happens when I install:
I install update folder with eboot inside game folder along with 401.PBP.
Then I run it in the game-mem stick. verifying 401.PBP-ok, verifying u235-ok.
"press x to start" it said. Then i presses x.
"Starting sce updater" then the screen went blank.
then this message came out:
"The system configuration of this PSP
system does not appear to be correct.
The update cannot be completed.
Contact the technical support for assistance,
(DRNFFFFFFBO)"
what should i do?