http://www.noeman.org/gsm/sony-psp-...0-ofw-psp-slim-without-phat-psp-hard-mod.html
I have tried this tutorial with a normal slim 1200 battery (put into TOOL mode using the MAX Battery Service Tool) and have a problem.
I got all the way to the part where you put the TOOL battery into the PSP and press 'x'.
The two lights on the left flashed for a few seconds and then the PSP turned itself off.
I then tried turning on the PSP whilst holding the 'R' button however nothing happened, it turned on but the green light stayed on.
I assume I bricked the PSP?
I tried running through the guide again, running the newbi installer but now when I press 'x' nothing happens.
I checked the log file on the memory stick and I found this error message :
PSAR decode error, pos=0x0000E080.
Any clues?
I have tried this tutorial with a normal slim 1200 battery (put into TOOL mode using the MAX Battery Service Tool) and have a problem.
I got all the way to the part where you put the TOOL battery into the PSP and press 'x'.
The two lights on the left flashed for a few seconds and then the PSP turned itself off.
I then tried turning on the PSP whilst holding the 'R' button however nothing happened, it turned on but the green light stayed on.
I assume I bricked the PSP?
I tried running through the guide again, running the newbi installer but now when I press 'x' nothing happens.
I checked the log file on the memory stick and I found this error message :
PSAR decode error, pos=0x0000E080.
Any clues?