PSP Pandora bat not working

[Bou]

Im converting my friends PSP to the latest customs and I haven't done it for awhile. I was a little rusty so I used the guide and followed it step by step. Everything works EXCEPT I cant get anything on the psp besides the power light to turn on when i put the pandora Bat in. The memstick light doesnt flash, the screen doesnt even go on. Its just blank.

 

[Alex]

you need to make a mms or when you made it you assigned it to boot only when a button is pressed, put in the pandora again and try pressing up.

if that dont work, make a mms on a CFW psp using dc8

 

[Bou]

I made the mms with my customs on my psp. a assigned the boot and everything. but the batterey still turns on with me pressing any buttons.and even when i press before i put the bat in the light still turns on and nothing else. should i reasign the boot button. (currently in teh up position.)

 

[Alex]

you could try that.

Also, is your memorystick magic supported?

 

[Simon19]

Coud be a long shot but if you go into your psp ms on the comp and navigate to
X:\TM\config.txt (X Being your drive letter)
Is there anything written there? Ive had a few DC installs and it hasn't writen to this file. this tells your psp where to boot from in the ms on what button pressed.

 

[Bou]

Does Sandisk not support? that might be the reason =__= I always use to do it with my good old 4 gig sony but lent it to a friend. and also are the 16gigHS cards supported?

 

[Alex]

i dont 16gb's are, you have to read the readme, i know that if the ms isnt magicgate supported that it causes problems

 

[A.0.A]

All MS are able to be made as a Magic stick but please be reminded that it's mostly required that you will do a Magic Stick in at least 1 gb memory stick!!., but 16gb are able also to be made become magic stick but it will cause too much problem plus it must be Original!!., also Sandisk can also perform to become A good magic stick also!...:wink: