• Steam recently changed the default privacy settings for all users. This may impact tracking. Ensure your profile has the correct settings by following the guide on our forums.

[Tutorial] Take a screenshot of DC6/DC7/DC8

silver_surfer

New Member
Take a screenshot of DC6/DC7/DC8

Sample:





Setup:
- rename dc's resurrection.prx to dc.prx
DC6/7 doesn't matter, so long as it's in the /kd/ folder still
- copy this resurrection.prx to the same folder
- put a 4.xx compatible eboot (like nandTool's) onto the root of your memory stick
- place a screenshot module in the same folder as dc.prx and resurrection.prx, name it "screenshot.prx"

Known Issues:
-exiting launched eboot after DC's menu will run MS firmware in the same way "test m33" does.

v4
- now optionally (if eboot file is present) patches dc's main menu to lauch ms0:/TM/EBOOT.PBP (case is likely important)
- passes argv, so in a case like nandtool you just can put EBOOT.PBP and ntbridge.prx into the /TM/ folder
*not tested on DC6 as of writing

v3
- solved loading m33 compressed modules, thanks to TheTorch for suggesting using kuKernelLoadModule instead of the normal sce function.

v2
- if present /kd/screenshot.prx will be loaded
- adds a "no choice" version which autoloads DC and tries to load "screenshot.prx" from the launching /kd/ folder


Download
(credits to cory1492 and to the developer of screenshot.prx)

Note: I have included the screenshot.prx in the zip file with ipl_checksum_v1 you
just need a 4.xx compatible eboot (like nandTool's) onto the root of your memory stick


Added: remotejoy_and_screenshot.rar
(courtesy of cory1492)


Alternative Multi

Setup:
- rename dc's resurrection.prx to dc.prx
DC6/7 doesn't matter, so long as it's in the /kd/ folder still
- copy this resurrection.prx to the same folder
- put a 4.xx compatible eboot (like nandTool's) onto the root of your memory stick
- place a screenshot module in the same folder as dc.prx and resurrection.prx, name it "screenshot.prx"

create HB1 or HB2 or both folders inside ms0:/PSP/
and place the homebrew you want to load

ex.
ms0:/PSP/HB1/EBOOT.PBP
ms0:/PSP/HB2/EBOOT.PBP

v3b - choice multi
- non-existant eboots will not appear in the menu
- added 2 additional key presses to allow for 2 other homebrews to run (case is important)
- circle: ms0:/EBOOT.PBP
- square: ms0:/PSP/HB1/EBOOT.PBP
- triangle: ms0:/PSP/HB2/EBOOT.PBP

Sample:



dc7ld_3_b_multi + screenshot
(credits to cory1492 and to the developer of screenshot.prx)
 

bohlendach

New Member
Take a screenshot of DC6/DC7/DC8

Setup:
- rename dc's resurrection.prx to dc.prx
DC6/7 doesn't matter, so long as it's in the /kd/ folder still

On the magic mem with dc8 installed?

- copy this resurrection.prx to the same folder

What resurrection.prx do you mean?

- put a 4.xx compatible eboot (like nandTool's) onto the root of your memory stick
- place a screenshot module in the same folder as dc.prx and resurrection.prx, name it "screenshot.prx"

And then I should be able to take a screenshut using the a button that has been assigned in the screenshut module?
 

angelsniper45

New Member
On the magic mem with dc8 installed?



What resurrection.prx do you mean?



And then I should be able to take a screenshut using the a button that has been assigned in the screenshut module?

The resurrection.prx is included in the download. Move and replace it to said location in flash0, and yes with mms. And you should be able to take a screenshot
 
Top