brick slim

[donsammy]

ive got a full brick slim, my friend thinks he erase the flash 0.
when i pyt pandora, it stays on formating flash0??
any ideas or good news???

 

[x3sphere]

ive got a full brick slim, my friend thinks he erase the flash 0.
when i pyt pandora, it stays on formating flash0??
any ideas or good news???

Sounds like a hardware problem.

 

[Hanzo_f19]

More info needed, has he toyed with the flash0, did he turned the PSP off while he was installing a firmware, what firmware did he had, etc...,

 

[donsammy]

he uses pandora to downgrade to 1.50.
he was semi brick yesterday, and today he says that hi erase flash 0, dont know how he did it

 

[donsammy]

More info needed, has he toyed with the flash0, did he turned the PSP off while he was installing a firmware, what firmware did he had, etc...,

slim was on 3.60 OF, he told me that he was Downgrading with pandora to 1.50,

 

[Hanzo_f19]

thats it! The slim cant use the 1.50 kernel.
there is guide here that teachs you how to make a "Despertar del Cementerio" (you need that to unbrick the PSP.)

Click here

PS:You can skip the Pandora's battery part, you already have it.

 

[donsammy]

thats it! The slim cant use the 1.50 kernel.
there is guide here that teachs you how to make a "Despertar del Cementerio" (you need that to unbrick the PSP.)

Click here

PS:You can skip the Pandora's battery part, you already have it.

thanks for the quick response,

my pandora and MS has el despertar del cementerio, when i run it goes
loading updater modules.........ok
flash0...
and it stays there ando does nothing

 

[Hanzo_f19]

Do you get a blank screen?

 

[donsammy]

Do you get a blank screen?

with magic MS and Pandora Bat i get the menu
x= 3.71 m33
O OF3.71
ect,

with normal bat if i turn it on would just see the bat green light for aprox 3 secons and off again

 

[Hanzo_f19]

well, use the magic one and press X

 

[donsammy]

well, use the magic one and press X

i did that but it wont get pass flash 0
heres what o get

loading updater modules.........ok
flash0...
and it stays there ando does nothing

 

[Hanzo_f19]

well, wait...a lot then.
I don't have a slim but i think that means that it is loading the PRXs

 

[donsammy]

well, wait...a lot then.
I don't have a slim but i think that means that it is loading the PRXs

ok i will leave it a while be back
the lights from the lan dont light up
thnxxxxxxxxxxxx

 

[Hanzo_f19]

leave it for..err..20/25 mins and post the results here, please

 

[donsammy]

leave it for..err..20/25 mins and post the results here, please

could i plug the power cord to make sure the bat doesnt run out of power???

 

[Hanzo_f19]

well, not sure, you can do it since you will not brick, but I advice you too put it since the begining of the process.

 

[donsammy]

25 minutes gone by, the lights are not flashing, when using the pandora all lights flashes,
it is still on formatting flash0...
it hasent move or done nothing.

it looks like if it is loop

 

[frosty5689]

it might be due to the memory stick being a fake memory stick check if it's fake

 

[donsammy]

it might be due to the memory stick being a fake memory stick check if it's fake

ive done more then 10 slims with this MS, it is not fake
thnxxxx anyway buddy

 

[donsammy]

it might be due to the memory stick being a fake memory stick check if it's fake

ok my friend told me hit didnt boot, so he did the
dumb the NAND???
would that help