• Steam recently changed the default privacy settings for all users. This may impact tracking. Ensure your profile has the correct settings by following the guide on our forums.

Tiff Exploit - HEN Information

Status
Not open for further replies.
wololo said:
I foresee a youtube video claiming that Homebrews run on 5.50...
Click to expand...

haha yeah i though about that too xD lets hope he wont do that
 
Well I sent him the edited H.Bin I made saying 5.50 :).
 
dont worry fellas. im not here to screw others over or make fake claims

---------- Post added at 10:43 PM EST ---------- Previous post was at 10:43 PM EST ----------
HEN-A said:
Well I sent him the edited H.Bin I made saying 5.50 :).
Click to expand...

Thanks i just got it
YOU ARE THE BEST
i've just recieved the file and online doesn't work. sorry for wasting your time HEN-A
whatever now i have a different firmware from most people yay!
 
My link did not work or the file did not work??
 
Ok :).

We will just have to wait until Maitnence is over i suppose.
 
Thats a possiblity and I would not be surprised.

But since the release of 5.50 frimware it would make sense to update the servers to also protect against HEN.
 
Guys, this is the last warning to stay on topic. A large thread clean up just took place, which resulted in the deletion of over 100 posts. If you want to discuss piracy, do it in the thread dedicated for it in Smart Talk located here.

Further OT or piracy related posts will be deleted without warning. This thread is ONLY for meaningful discussion about HEN, not you not being able to afford games.
 
I'm at wits end trying to get HEN working, with no forward progress.

I own a Japanese psp2000 red slim psp with 5.03 ofw with the tiff in f:/psp/photos/chickhen and h.bin in f:/

I have tried the following, all with similar results (lock with mem light solid or lock with mem light off both shutting down the psp)
Sometimes the tiff thumbnail will load with a out of mem error if i try to open the image.
Ive tried to get ithis working at least 200 times over the last few days with no luck.

-Different battery (fat vs slim)/no battery
-Genuine sony stick that came with the unit (32mb)/Sandisk 8gb stick (MG supported)
-Loading demos/games before running hen
-adding more/deleting images
-slideshowing all images then standby mode and then booting up
-slowly/quickly scrolling, flicking in and out of directory
-formatting mem stick/defaulting settings
-clearing cache via internet browser
-changing every system setting
-turning the wlan on/off, plugging in usb

I have tried all the tips in this forum and dark alex's site, I'm pretty much out of ideas.:sleep:

Does anyone know if the JP 2000 model will work, the only reason I can think of is the memory addresses may be different as my model has the 1seg icon and a few more options in network ccompared to us/uk psp's.
 
Banshi said:
I've been using V2 from Davee's dev site, I never tried the V1 or unofficial hex edited version. :(
Click to expand...

1) format your memstick through PSP
2) add hbin to MS root
3) add the entire folder included in davees RAR to the /PSP/PHOTO directory (this includes the tiff, 4 GIF files, and thumbs.db)
4) default your psp's settings
5) take UMD out of PSP, unplug any USB cables
6) turn psp off
7) turn psp on (with memstick in it of course)
8) goto photo/memstick on XMB
9) browse over the the folder containing the images (chickHEN)
10) do NOT click folder... wait about 10 seconds, then press X
11) after pressing X, dont do ANYTHING... just wait. psp should crash then reload with the HEN loaded.
 
banshi, i read somewhere that people with chinese PSPs (least, i think that's what it was) had to change the character set (again, i think that's what he said.) convert everything to default settings and get everything set up for an english user, it may work....
 
hi

when i try to install Iver PSP ( there is an installation in LUA)
a warning comes which reads:
This will flash the iver psp drivers to flash1:/
Flashing is dangerous and do it at your own risk

can anyone tell me what will this installation do and should i even try it?
will it be any different if it were to be on a CFW .. now that i am on hen?

kindly reply
 
Banshi said:
I'm at wits end trying to get HEN working, with no forward progress.

I own a Japanese psp2000 red slim psp with 5.03 ofw with the tiff in f:/psp/photos/chickhen and h.bin in f:/

I have tried the following, all with similar results (lock with mem light solid or lock with mem light off both shutting down the psp)
Sometimes the tiff thumbnail will load with a out of mem error if i try to open the image.
Ive tried to get ithis working at least 200 times over the last few days with no luck.

-Different battery (fat vs slim)/no battery
-Genuine sony stick that came with the unit (32mb)/Sandisk 8gb stick (MG supported)
-Loading demos/games before running hen
-adding more/deleting images
-slideshowing all images then standby mode and then booting up
-slowly/quickly scrolling, flicking in and out of directory
-formatting mem stick/defaulting settings
-clearing cache via internet browser
-changing every system setting
-turning the wlan on/off, plugging in usb

I have tried all the tips in this forum and dark alex's site, I'm pretty much out of ideas.:sleep:

Does anyone know if the JP 2000 model will work, the only reason I can think of is the memory addresses may be different as my model has the 1seg icon and a few more options in network ccompared to us/uk psp's.
Click to expand...


I finally got HEN working :closedeyes:
This is what I did for my Japanese psp2000 model.
1. Format memory stick (mine is Sandisk 8gb MG supported (aka not fake))
2. Restore default settings.
3. Hard reboot
4. change all settings to match 2002 model as per this link:
PSP-1002/PSP-2002/PSP-3002 series
5. extract files from rar directly to memory stick. h.bin to f:/, all files in chickhen to f:/psp/photo (make the directory in caps)
6. hard reboot
7. open chickhen directory in photos and wait.

I had to retry about 6 times and it finally worked.

(Battery was fully charged, usb disconnected, wlan off. All settings as default as per PSP2002 model as per above web site)

I have run PSPident, My psp is a Slim (02g) TA-085 board.
 
Banshi said:
I finally got HEN working :closedeyes:
This is what I did for my Japanese psp2000 model.
1. Format memory stick (mine is Sandisk 8gb MG supported (aka not fake))
2. Restore default settings.
3. Hard reboot
4. change all settings to match 2002 model as per this link:
PSP-1002/PSP-2002/PSP-3002 series
5. extract files from rar directly to memory stick. h.bin to f:/, all files in chickhen to f:/psp/photo (make the directory in caps)
6. hard reboot
7. open chickhen directory in photos and wait.

I had to retry about 6 times and it finally worked.

(Battery was fully charged, usb disconnected, wlan off. All settings as default as per PSP2002 model as per above web site)

I have run PSPident, My psp is a Slim (02g) TA-085 board.
Click to expand...


:scared: TA-085??? why the Hell you're using Hen if you've got a mobo that allows you to use pandora and install CUSTOM FIRMWARES???
People it's strange!!:sleep::sleep:
 
Status
Not open for further replies.
Back
Top