• Steam recently changed the default privacy settings for all users. This may impact tracking. Ensure your profile has the correct settings by following the guide on our forums.

3.40 OE-A Install Guide

I downloaded the updates that were in the original post, put them in the oeupdmaker file but now what do i do? Do i plug in my psp to my compueter, where do i put the files etc.
 
the_car_guy71 said:
I downloaded the updates that were in the original post, put them in the oeupdmaker file but now what do i do? Do i plug in my psp to my compueter, where do i put the files etc.
Click to expand...

well read the guide... it says what to do next...

Now navigate to the game menu on your PSP and execute the update maker
 
after my psp is 3.40 OE-A the iso game what UMD cd in to play the games../
why?
my psp go like this - 3.11 > 3.50 > 1.5 > 3.40 oe-a .
 
bioss said:
after my psp is 3.40 OE-A the iso game what UMD cd in to play the games../
why?
my psp go like this - 3.11 > 3.50 > 1.5 > 3.40 oe-a .
Click to expand...

You'll need a UMD in the drive for maximum compatibility with games on 3.40 OE-A.
 
does anyone have a link to download the DATA.DXAR file when i tried updating it did go into the oeupdmaker file. please help me with this thank you.
 
the_car_guy71 said:
does anyone have a link to download the DATA.DXAR file when i tried updating it did go into the oeupdmaker file. please help me with this thank you.
Click to expand...

after you run oeupdmaker it creates a DATA.DXAR in the oeupdmaker folder.

then you just copy this file over to the 340oeflasher folder.
 
I think I need a little bit of help from people who really knows the PSP-system.

First I upgraded to fw3.5, then I downgraded to fw1.50. Everything worked fine after that.
Then I wanted to install fw3.40 oe-a, but something must have gone seriously wrong. I know I did everything in the right steps, and followed the instructions carefully. After the install of the new custom firmware, my PSP turns on, but it's all black. I can see that the backgroundlight is lit and the power is lit too. I can turn it off with the powerswitch, but I can't get into the recovery mode. Turn it on and off is all I can do.

When I put the memorycard(Max 4GB - Datel PSP HDD 001) that I used into a card reader, it can't be read. Maybe it's not compatible with PC's?

I'm not sure which motherboard I got, but it says IC6001 deep inside my UMD-bay. Looks like it's printed on the motherboard, and not just inside the UMD-bay.

Is it possible that I've got myself a brand new brick, or is it possible to do something with it?

I also have a SanDisk Memory Stick Pro Duo 512MB(MagicGate-compatible). Is it possible to get the PSP filestructure onto that card, and maybe start over again?

Hope for some good answers, and thanks in advance!!
 
Lomingus said:
I think I need a little bit of help from people who really knows the PSP-system.

First I upgraded to fw3.5, then I downgraded to fw1.50. Everything worked fine after that.
Then I wanted to install fw3.40 oe-a, but something must have gone seriously wrong. I know I did everything in the right steps, and followed the instructions carefully. After the install of the new custom firmware, my PSP turns on, but it's all black. I can see that the backgroundlight is lit and the power is lit too. I can turn it off with the powerswitch, but I can't get into the recovery mode. Turn it on and off is all I can do.

When I put the memorycard(Max 4GB - Datel PSP HDD 001) that I used into a card reader, it can't be read. Maybe it's not compatible with PC's?

I'm not sure which motherboard I got, but it says IC6001 deep inside my UMD-bay. Looks like it's printed on the motherboard, and not just inside the UMD-bay.

Is it possible that I've got myself a brand new brick, or is it possible to do something with it?

I also have a SanDisk Memory Stick Pro Duo 512MB(MagicGate-compatible). Is it possible to get the PSP filestructure onto that card, and maybe start over again?

Hope for some good answers, and thanks in advance!!
Click to expand...

hm... there is a good chance that you bricked. Are you sure you're entering Recovery Mode correctly though? You need to hold R while turning on the PSP on... for about 10 seconds or so. I just usually hold it until the screen comes up.
 
i did all the steps, ran the thing, and i get "invalid pbp file" as it's trying to make data file
yes, it's named 150.pbp and 340.pbp
 
Hey,when I start a homebrew,the screen will opposite the bright level,like:
Level 3>>1
Level 1>>3
Level 4>>Black
Any ways I can stop this?
 
cbnj said:
i did all the steps, ran the thing, and i get "invalid pbp file" as it's trying to make data file
yes, it's named 150.pbp and 340.pbp
Click to expand...

try formatting your ms? or try a different ms?

if you are positive the files are named correctly its almost sure to be a memory stick issue.

dennis96411: nah that is normal for people with TA-082/86 motherboards.
 
x3sphere said:
try formatting your ms? or try a different ms?

if you are positive the files are named correctly its almost sure to be a memory stick issue.

dennis96411: nah that is normal for people with TA-080/82 motherboards.
Click to expand...
So that is normal with IC1003(TA-082)motherboard?
What about the other motherboards?
 
dennis96411 said:
So that is normal with IC1003(TA-082)motherboard?
What about the other motherboards?
Click to expand...

Yes. The problem does not affect users with TA-079/81 motherboards though.
 
What's custom topmenu?
Is it like the battery?
Cause I have a file called battery.prx and I don't know how to install it on the top menu.
I got to recovery mode and I select Plugins,but nothing in it.
How do I install the plugin?
Please help!!
And one question about recovering my psp when semi-bricked.
Sorry,I don't want to visit so many websites,but where I can download a perfect recovery EBOOT for PSP\GAME\RECOVERY\ ?
 
dennis96411 said:
What's custom topmenu?
Is it like the battery?
Cause I have a file called battery.prx and I don't know how to install it on the top menu.
I got to recovery mode and I select Plugins,but nothing in it.
How do I install the plugin?
Please help!!
Click to expand...

Custom top menu = custom icons I believe.

Anyway... to install a plugin, you need to go to X:/seplugins

Move the battery.prx there, and then create a file called vsh.txt

Open up the vsh.txt and write this path in:

ms0:/seplugins/battery.prx

Then boot up recovery mode, go into plugins and enable battery.prx
 
the_car_guy71 said:
I got 3.40oea installed where should i pu my iso and cso files?
Click to expand...

You put it in X:\ISO\
If you don't have ISO folder create one in the root of your memory stick.
 
Hey x3sphere I've just bought a blue version PSP 1.5 firmware already installed now i was thinking if i was to upgrade to 3.40 oe-a which is very tempting i have to say does it really matter if its "TA...." or "HEN"? don't wanna mess up the PSP as my second bought. Thanks!
 
x3sphere said:
hm... there is a good chance that you bricked. Are you sure you're entering Recovery Mode correctly though? You need to hold R while turning on the PSP on... for about 10 seconds or so. I just usually hold it until the screen comes up.
Click to expand...
Yupp, even tried for longer, with-/without UMD. Hmm..I probably just have to buy me a new one, unless it's possible to do something:crying:
 
You must log in or register to reply here.
Back
Top