• Steam recently changed the default privacy settings for all users. This may impact tracking. Ensure your profile has the correct settings by following the guide on our forums.

Devhook 0.52 Install Guide with 3.11

infinitekaos said:
Great job on the tutorial, scared be when it froze writing the flash file, but ijust hit O after it sat for about 10 minutes and it went to the menu, all went well.

only problem im having, and sorry, but i didnt see it in this thread, only as a question with no answer:

once in 3.01 menu, i try to use "return to 1.5" and it acts like its going to, and the psp just turns off.

i had to make a "kd" folder inside the "dh" folder in the root of my memory stick, and put the 1.5 reboot.bin in it.

are there other files i have to put in as well to have it return to 1.5 from 3.1?


thanks again for the easy to follow tutorial with all proper links :)
Click to expand...

ah yeah, he changed the folder paths from .50. The 1.5 reboot.bin should go in the ms0:/dh/05/kd folder.

still with 2.71SE it seems you don't need the 1.5 reboot.bin at all (unlike previous versions), so if it still doesn't work it could be a 1.5 bug..
 
x3sphere said:
ah yeah, he changed the folder paths from .50. The 1.5 reboot.bin should go in the ms0:/dh/05/kd folder.

still with 2.71SE it seems you don't need the 1.5 reboot.bin at all (unlike previous versions), so if it still doesn't work it could be a 1.5 bug..
Click to expand...
I have 3.02 FW and I have done everything up until the point where I run the PSAR Dumper, after I run it, it won't start "(8002014C)" I'd appreciate it if I could get some help. Thanks...
 
logo said:
I have 3.02 FW and I have done everything up until the point where I run the PSAR Dumper, after I run it, it won't start "(8002014C)" I'd appreciate it if I could get some help. Thanks...
Click to expand...


Devhook only runs on firmwares 1.5 - 2.71 .. you are out of luck, sorry..
 
problems

hey i did all the steps and when i load devhook as 3.01, it says it's rebooting and then a black screen for like 10 seconds and then my psp turns off, when i turn it back on it boots fw 1.50, here are my psp specs:

non-Ta-082 mb
1.50 firmware
recently had devhook v4.6 - windows to psp installed version
 
zeromaster said:
hey i did all the steps and when i load devhook as 3.01, it says it's rebooting and then a black screen for like 10 seconds and then my psp turns off, when i turn it back on it boots fw 1.50, here are my psp specs:

non-Ta-082 mb
1.50 firmware
recently had devhook v4.6 - windows to psp installed version
Click to expand...

It seems like the reboot.bin is not present, do you have a reboot.bin in the F0 folder?
 
The reboot.bin is automatically dumped if you did the PSAR Dumper part correctly..

Reason for just a black screen is one of two things - no reboot.bin, or you did not transfer over the dh folder from the devhook zip.

zeromaster: It would be in the one in the 301 dir
 
Ok, I am a noob. I need 2 things explained real fast.

I followed the instructions and when i go to Start Devhook it shuts down the psp. Is this suppose to happen?

Secondly how or where do i put the ISO files or is there another process in running the iso files?

Thanks to all
 
no...

x3sphere said:
The reboot.bin is automatically dumped if you did the PSAR Dumper part correctly..

Reason for just a black screen is one of two things - no reboot.bin, or you did not transfer over the dh folder from the devhook zip.

zeromaster: It would be in the one in the 301 dir
Click to expand...

well i got the 1.5 update n put it in my psp, but it stays on the psp screen...
 
Mako said:
Ok, I am a noob. I need 2 things explained real fast.

I followed the instructions and when i go to Start Devhook it shuts down the psp. Is this suppose to happen?

Secondly how or where do i put the ISO files or is there another process in running the iso files?

Thanks to all
Click to expand...

No, thats not supposed to happen. You did something wrong, and those files go in the ISO folder on your memory stick.
 
New doing this, need help plz

I've never used devhook, i have 1.5 FW and im following the instructions step-by-step, I dont see where or how to start devhook, also, whats a "flash install" sorry for all these noobie questions
 
Abaddon said:
I've never used devhook, i have 1.5 FW and im following the instructions step-by-step, I dont see where or how to start devhook, also, whats a "flash install" sorry for all these noobie questions
Click to expand...

Devhook should appear in your GAME folder, you can start it from there.
 
Mako said:
Where is this folder? I dont see it in any of the folders. Is it suppose to be in the game folder?
Click to expand...

no, create it:

msdrive:/ISO
 
Thx for the response.

I created the ISO directory now the devhook menu has UMD Emulation. However, and man i feel stupid for asking so many questions, how do I launch it?

I am use to the old school UMD Emulator from way back before all this devhook stuff started.

Thanks for the help and the patience you are having with me.
 
Never mind. I didn't realize I didn't have a UMD in the drive.

However the game I tried crashed. It was crossword challenge or something like that.

It froze at the PSP screen.
 
Mako said:
Never mind. I didn't realize I didn't have a UMD in the drive.

However the game I tried crashed. It was crossword challenge or something like that.

It froze at the PSP screen.
Click to expand...


ahh, could be a bad dump. Devhook is very picky when it comes to rebuilt isos, untouched works best.
 
You must log in or register to reply here.
Back
Top