• Steam recently changed the default privacy settings for all users. This may impact tracking. Ensure your profile has the correct settings by following the guide on our forums.

How To: Install Popsloader on 3.80 M33, 3.90 M33

kerubin said:
HELP! used 3.71 eboot, this two files did not appear vsh/module/pafmini.prx, vsh/module/libpspvmc.prx
Click to expand...

Are you looking in the correct folder? They have to be there... if not, try dumping the EBOOT again.
 
yes. i'm looking in the correct folder. And i realise when dumping half way there's a error. And for some reason, 3.40 is working for me.
while dumping there's a psar decode error pos 0Xsmthsmth.
Can anybody help me?
 
kerubin said:
yes. i'm looking in the correct folder. And i realise when dumping half way there's a error. And for some reason, 3.40 is working for me.
while dumping there's a psar decode error pos 0Xsmthsmth.
Can anybody help me?
Click to expand...

Maybe the 3.72 EBOOT you downloaded is corrupted. I would try re-downloading it.
 
x3sphere said:
Maybe the 3.72 EBOOT you downloaded is corrupted. I would try re-downloading it.
Click to expand...
Hey thanks for the guide, But after following it I tryed to enable Pops on 3.90m33 and there's nothing under my plugins in the recovery menu now, what gives?!!?
 
I'm running 3.90m33-3 with the cmx plugging. Popsloader won't even show the R button menu, I've been trying to run metal gear solid (normal version and a remake) and neither will get past the blank screen after the sony logo.
Any idea whats going on? :(
I'm making a backup atm, I'll try installing just the popsloader and mgs once its done.
 
Thxs for the noobproof guide of installing pops. My problem is I already have pops and cwcheats working but when I transfer my memory card (with both stuff) to another psp, that psp cannot detect either pops or cwcheats. I tried disabling/enabling them even installing pops and cwcheats onto that psp with another memory card to no avail. I deleted the config.exe on both stuff on my memory card which neither worked. The only difference is the working psp was 3.90 while the problem psp is 3.71. Any advice?
 
ufts said:
Thxs for the noobproof guide of installing pops. My problem is I already have pops and cwcheats working but when I transfer my memory card (with both stuff) to another psp, that psp cannot detect either pops or cwcheats. I tried disabling/enabling them even installing pops and cwcheats onto that psp with another memory card to no avail. I deleted the config.exe on both stuff on my memory card which neither worked. The only difference is the working psp was 3.90 while the problem psp is 3.71. Any advice?
Click to expand...

Using the popsloader for 3.80/3.90 M33 won't work with 3.71. But that doesn't explain why it isn't showing up in the plugin selection menu.

What do you have in your game.txt, vsh.txt, and pops.txt configuration files on the problem PSP?
 
x3sphere said:
Using the popsloader for 3.80/3.90 M33 won't work with 3.71. But that doesn't explain why it isn't showing up in the plugin selection menu.

What do you have in your game.txt, vsh.txt, and pops.txt configuration files on the problem PSP?
Click to expand...

I think you misunterstood. The plugins do appear in recovery mode but the psp just can't detect pops when I hold the R button down. Is there pops for 3.71 then? Slightly off-topic but why can't cwcheats also work on the psp?
 
ufts said:
I think you misunterstood. The plugins do appear in recovery mode but the psp just can't detect pops when I hold the R button down. Is there pops for 3.71 then? Slightly off-topic but why can't cwcheats also work on the psp?
Click to expand...

Yes, it was released with 3.71 M33-3.

http://forums.exophase.com/showthread.php?t=4405

Just replace all the files located in the seplugin folder of the archive and popsloader should work fine. As for CWCheat, try using an older version as well, the newer builds probably haven't been tested on 3.71 M33.

Here's a link to 0.2.0: http://forums.exophase.com/showthread.php?t=4983
 
Thus the only thing I have to do is download the 3.72 version of pops and transfer everything to it. Thanks.
 
10. Now enable the plugin. To do this, boot your PSP into recovery mode by holding R when turning the power switch on, then enter plugins, and enable popsloader.prx. Exit recovery mode.

i CAN'T MOVE DOWN the button down to go into plugin
how?
 
davidw89 said:
10. Now enable the plugin. To do this, boot your PSP into recovery mode by holding R when turning the power switch on, then enter plugins, and enable popsloader.prx. Exit recovery mode.

i CAN'T MOVE DOWN the button down to go into plugin
how?
Click to expand...

Does your d-pad work?
 
nup

SOLUTION: DO NOT USE 3.52 EBOOT FIRMWARE IT DOES NOT WORK
USE 3.72

iam using 3.90 m33 btw

THANKS X3SPHERE!!

Btw what do i need now to play psp game
 
psardumper dows up as corrupted data what do i do btw im running 4.01 M33-2
 
You did not copy it over to your memory stick correctly then. Make sure you copied the "newpsardumper" folder.
 
i did the psardumper is in my psp/game directory btw i used the 3.72 update
 
Vincen+207 said:
i did the psardumper is in my psp/game directory btw i used the 3.72 update
Click to expand...

I'm almost certain you did not copy it over correctly.

Again, make sure "newpsardumper" is in your GAME folder. If you copied over "M33_NEWPSARDUMPER" it will show corrupt data, as the EBOOT.PBP is not located in that folder.
 
PLS HELP ME OUT HERE I HAVE THE 4.01 M33 - 2 FIRMWARE AND I DID EXACTLY AS THE TUTORIAL SAYD ADDED THE EXTENSIONS 372 AND WHEN I START A PSX GAME AND I SELECT ANY OF THE POPS VERSIONS IT JUST BLOCKS LIKE THAT AT THE POPS LOADER SELECTION SCREEN ANYONE KNOW WHAT I DID WRONG?:mellow: PS ONLY IF I SELECT BOOT FROM FLASH THAN THE GAME STARTS
 
Yo bro , big props for setting this shit up. Got confused about moving the stuff from the seplugins , but after that , omfg FF7 works man .


You deserve a metal :):wink:
 
You must log in or register to reply here.
Back
Top