• Steam recently changed the default privacy settings for all users. This may impact tracking. Ensure your profile has the correct settings by following the guide on our forums.

KeyCleaner

C

Casey44

New Member
Additional: "Hardcoded" really hard? So, a part that transfers control TO the Flash0? Or the first entrypoint IN the Flash0 that first gets control? (so a bit less hard, but maybe never to be changed)
Because you implicitly call it "IPL Version 1.5".

Sorry if not relevant for end-user, but I try to get a grip on the normal workings of the PSP. Hard to find descriptions :-(
 
C

Chilly Willy

Contributor
Casey44 said:
Additional: "Hardcoded" really hard? So, a part that transfers control TO the Flash0? Or the first entrypoint IN the Flash0 that first gets control? (so a bit less hard, but maybe never to be changed)
Because you implicitly call it "IPL Version 1.5".

Sorry if not relevant for end-user, but I try to get a grip on the normal workings of the PSP. Hard to find descriptions :-(
Click to expand...

I'm not 100% sure on how the PSP handles the IPL, if it's in the flash or in ROM in the CPU like many modern consoles. It's not something I've had to deal with, so I haven't bothered looking into it. You'd be best to check the forum at lan.sh if you really want info that deep about the PSP. That's where I get most of my info on the PSP from.

http://lan.sh/forumdisplay.php?f=43
 
N

Nocuddle

New Member
Hi Chilly

I've been reading the whole posts here but Im still unsure (or hard to swallow). :p

I got this msg on my Silver PSP-1000:

04 cleared key - ok
05 copy of original key 0x0004
06 copy of original key 0x0005
08 no key (code 0x80000025)
41 original key - ok
42 copy of original key 0x0041
43 original key - ok
45 copy of original key 0x0047
46 copy of original key 0x0045
47 no key (code 0x80000025)

PSP is TA-082/86
Unrecognized key state

I tried to fix without keys but it wont allow me & saying sumthin that i need keys.

Now to restore the keys, I need to put a original keys from fresh PSP right? Should I copy ALL keys to MS or just the keys shown above 04, 05, 06, 08, 41, 42, 43, 45, 46, 47?

And are there any particular CRCs of the keys I need to watch for?
I ask help from 2 different guy for their dumps. Couple keys arent the same. I believe both dump came from TA-082. The 1st one I cannot be sure (forgot) & 2nd is definetly from a TA-082/2.71fw.

(1st dump) - (2nd dump)
04.bin DFB50041 - same
05.bin B1009223 - same
06.bin EC25D704 - 45A4AC1A
08.bin not found
41.bin 2D278CA3 - same
42.bin B2AA7578 - same
43.bin 55E26FF6 - same
45.bin 4490D7AD - 54E20C85
46.bin B2AA7578 - same (this is also the same with 42)
47.bin 214E7710 - same

Btw, the USB is working on my PSP but not the brightness, which is reversed. Dunno abt the battery problem yet, or any other thing for that matter. Havent use much this new Silver PSP, I also got a Black non TA-082.
 
C

Chilly Willy

Contributor
Nocuddle said:
Hi Chilly

I've been reading the whole posts here but Im still unsure (or hard to swallow). :p

I got this msg on my Silver PSP:

04 cleared key - ok
05 copy of original key 0x0004
06 copy of original key 0x0005
08 no key (code 0x80000025)
41 original key - ok
42 copy of original key 0x0041
43 original key - ok
45 copy of original key 0x0047
46 copy of original key 0x0045
47 no key (code 0x80000025)

PSP is TA-082/86
Unrecognized key state

I tried to fix without keys but it wont allow me & saying sumthin that i need keys.

Now to restore the keys, I need to put a original keys from fresh PSP right? Should I copy ALL keys to MS or just the keys shown above 04, 05, 06, 08, 41, 42, 43, 45, 46, 47?

And are there any particular CRCs of the keys I need to watch for?
I ask help from 2 different guy for their dumps. Couple keys arent the same. I believe both dump came from TA-082. The 1st one I cannot be sure (forgot) & 2nd is definetly from a TA-082/2.71fw.

(1st dump) - (2nd dump)
04.bin DFB50041 - same
05.bin B1009223 - same
06.bin EC25D704 - 45A4AC1A
08.bin not found
41.bin 2D278CA3 - same
42.bin B2AA7578 - same
43.bin 55E26FF6 - same
45.bin 4490D7AD - 54E20C85
46.bin B2AA7578 - same (this is also the same with 42)
47.bin 214E7710 - same

Btw, the USB is working on my PSP but not the brightness, which is reversed. Dunno abt the battery problem yet, or any other thing for that matter. Havent use much this new Silver PSP, I also got a Black non TA-082.
Click to expand...

I can't tell anything from the CRCs you posted. Give me a KC status table for that other PSP. Your Silver PSP is a hard-downed PSP. It's the same as the 2.71 soft-downed, but also kills key 0x47. You can fix all the keys except for 0x47 by doing fix with files and a set of GOOD keys from a TA-082. I can't tell if that second PSP has good keys as you didn't post the KC status.

The reverse brightness is due to a change in the PSP LCD module for newer TA-082's and nearly all TA-086's. That was compensated for by adding some new display libs and an extra key (key 8 ). The 3.52 M33 custom firmware is supposed to have a fix for that in it. Older custom firmwares require you to write some display libs into the flash and alter some files. It's a pain, so most folks shouldn't bother.
 
N

Nocuddle

New Member
Sorry I cant give you the KC status of 1st & 2nd dumps. They arent mine, I got it from some1 else on the net. The 1st dump actually from TA-079. So then technically I cant use this for safety reason right?

When you said 47 is killed is it really bad thing? You are scaring me. +_+;

I think I might go crazy (suicidal) mode. I may just copy the 2nd dump keys (from other guy's TA-082/2.71) onto MS & try fix from there. If it goes brick, can it be restored by simply doing the "recovery"? My Silver is on 3.03 OE-C.

Btw, is new KC gonna come out soon?
Thanks for ur s/w & help. :)

EDIT:
Done some changing. This is after applying 05, 06, 42, 45, 46.

04 cleared key - ok
05 patched key - ok
06 original key - ok
08 no key (code 0x80000025)
41 original key - ok
42 cleared key - ok
43 original key - ok
45 original key - ok
46 cleared key - ok
47 no key (code 0x80000025)

Unrecognized key state
 
C

Chilly Willy

Contributor
Nocuddle said:
Sorry I cant give you the KC status of 1st & 2nd dumps. They arent mine, I got it from some1 else on the net. The 1st dump actually from TA-079. So then technically I cant use this for safety reason right?

When you said 47 is killed is it really bad thing? You are scaring me. +_+;

I think I might go crazy (suicidal) mode. I may just copy the 2nd dump keys (from other guy's TA-082/2.71) onto MS & try fix from there. If it goes brick, can it be restored by simply doing the "recovery"? My Silver is on 3.03 OE-C.

Btw, is new KC gonna come out soon?
Thanks for ur s/w & help. :)

EDIT:
Done some changing. This is after applying 05, 06, 42, 45, 46.

04 cleared key - ok
05 patched key - ok
06 original key - ok
08 no key (code 0x80000025)
41 original key - ok
42 cleared key - ok
43 original key - ok
45 original key - ok
46 cleared key - ok
47 no key (code 0x80000025)

Unrecognized key state
Click to expand...

Actually, in "fix with files", KC steps through each folder telling you the status of the keys inside it. You could have used that on the keys you got to find their statuses.

No, TA-079 keys in general can't be used on a TA-082/86. One or two are the same, but most aren't.

You seem to have missed the "copy of original key 4" that was in key 5 to fix key 4. Other than that, you seem to have cleared up the keys pretty well. You really need to fix key 4 - some of the oddball problems people have are related to a bad key 4. If you still have a dump of that key 5 (0x0005.bin), rename it to 0x0004.bin and try fix with files again.

I haven't quite finished v1.2 of KC yet... real life intruding recently and all. I'm still working on it, so don't be surprised if it pops up one of these days. :smile:
 
N

Nocuddle

New Member
Aha.

Thanks again for ur help. I fixed 04 keys & now it says Key State: Chilly Willy soft-downed TA-082/86.
I feel much more safer now. ^____^

What abt 42 & 46 showing "cleared", are they ok to leave it like that?
Also what abt 05 too, it say patched. And 47 just leave it?

Looking foward from ur new update. :)
 
C

Chilly Willy

Contributor
Nocuddle said:
Aha.

Thanks again for ur help. I fixed 04 keys & now it says Key State: Chilly Willy soft-downed TA-082/86.
I feel much more safer now. ^____^

What abt 42 & 46 showing "cleared", are they ok to leave it like that?
Also what abt 05 too, it say patched. And 47 just leave it?

Looking foward from ur new update. :)
Click to expand...

0x42 and 0x46 are supposed to be cleared, and if 5 says "patched" it means it a regular key 5 with my or codes02's patch applied (I'll add NOOBZ 3.50 patch to the next rev). Leave 0x47 until the next revision of KC comes out. It should be able to fix it for you. You don't need to worry about it much - I don't know of any problems linked to key 0x47.
 
Cheezeball99

Cheezeball99

But I was committed after that birthday party...
M

MatthewL

New Member
Hi Chilly Willy, big thanks for your KC, and I have one question about restoring 0x0006 too on a 3.03 Noobz dg-ed PSP.
Some info there:
04 - original - ok
05 - patched - ok
06 - copy of original 05
08 - no key
41 - original - ok
42 - cleared - ok
43 - original - ok
45 - original - ok
46 - cleared - ok
47 - original - ok
Key state: Chilly Willy soft-downed TA-082/86 - bad key 0x0006
So as I've read the thread I've seen an other member with the same problem, so I know I must hex-edit a 06 key by HarleyG's IDS guide. I just wanna know, if editing key 06 and putting it in a new dir, and giving KeyCleaner the dir will work, or I have to put in a full dump?

Thanks in advance.
 
C

Chilly Willy

Contributor
MatthewL said:
Hi Chilly Willy, big thanks for your KC, and I have one question about restoring 0x0006 too on a 3.03 Noobz dg-ed PSP.
Some info there:
04 - original - ok
05 - patched - ok
06 - copy of original 05
08 - no key
41 - original - ok
42 - cleared - ok
43 - original - ok
45 - original - ok
46 - cleared - ok
47 - original - ok
Key state: Chilly Willy soft-downed TA-082/86 - bad key 0x0006
So as I've read the thread I've seen an other member with the same problem, so I know I must hex-edit a 06 key by HarleyG's IDS guide. I just wanna know, if editing key 06 and putting it in a new dir, and giving KeyCleaner the dir will work, or I have to put in a full dump?

Thanks in advance.
Click to expand...

Just 0x0006.bin in the folder is fine. No need for ALL the keys when 6 is the only one you're changing. 8)
 
O

obogobo

New Member
Are my keys ok?

hey guys all my keys say either original key - okay or cleared key - okay except for idstorage key 0x0005 and 0x0006 which say unknown status. Is this ok if I for some reason want to go back up to 3.52 official or something?
 
C

Chilly Willy

Contributor
obogobo said:
hey guys all my keys say either original key - okay or cleared key - okay except for idstorage key 0x0005 and 0x0006 which say unknown status. Is this ok if I for some reason want to go back up to 3.52 official or something?
Click to expand...

No, key 5 should say patched, and key 6 should say original ok.
 
Richlando

Richlando

Member
Ok, key 0x0008 says no key (code 0x80000025)
key 0x0042 says cleared key (okay)
key 0x0046 is cleared as well (okay)
Everything else is original.

It says PSP is a TA-079-081 and the key state is unpatched psp.

Do I need to correct anything?
 
C

Chilly Willy

Contributor
RJC4LIFE said:
Ok, key 0x0008 says no key (code 0x80000025)
key 0x0042 says cleared key (okay)
key 0x0046 is cleared as well (okay)
Everything else is original.

It says PSP is a TA-079-081 and the key state is unpatched psp.

Do I need to correct anything?
Click to expand...

Well, as long as it really IS a TA-079 or 81, it should be fine. Key 8 is only on VERY new TA-082s, and most TA-086s. The other keys are fine. key 5 only needs to be "patched" for TA-082/86 PSPs.
 
Richlando

Richlando

Member
I popped open the UMD Drive and there isn't any writing on the motherboard so it should be a TA-079 or 81. Thanks for the reply CW!
 
C

Chilly Willy

Contributor
RJC4LIFE said:
I popped open the UMD Drive and there isn't any writing on the motherboard so it should be a TA-079 or 81. Thanks for the reply CW!
Click to expand...

Make certain you're looking in the right place!! It can be hard to see if you don't know what you're looking for. Make note of the picture here: http://forums.exophase.com/showthread.php?t=858

When you have the back of the PSP facing you and the PSP is upright and you open the door, it's to the very top right of the opening, and is printed upside down. It took a while for me to spot it myself on my TA-082.
 
You must log in or register to reply here.
Top